Installed the OEM Offroad Light Switch and did some rewiring behind the center console. I had originally installed the backlights to each switch by splicing into neighboring switches, but this turned out to be unstable. Instead, I used an existing connector and made a multi-prong harness. Everything was wired up and works wonderfully! Now I need to run the trigger wire to the switch and install relays in the back. Also installed the panels in the back to cover up the holes that were left from the subwoofer removal. There is so much room in the cargo area once the sw was removed, and from an audio standpoint, I don't hear a difference (the OEM sw must be quite weak). The black bar connecting the two hooks is so that I can hang Molle bags from.
